Home > News
News

What Is The Operation Method Of The Blister Packaging Machine?

Jul. 09, 2019

The operation method of Blister Packaging Machine:


Blister Packaging Machine

Blister Packaging Machine


1. Prepare medicines, packaging materials, replace the batch number template, install PVC and aluminum foil, check the cooling water, and carefully clean the equipment;

2. Turn on the power supply, turn on the compressed air;

3. Press the heating button and adjust the heating and heat sealing temperature control table to the appropriate temperature;

4. Pull the PVC rigid piece through the channel to the punching knife and pull the aluminum foil under the heat sealing plate;

5. When the heating plate and the heat sealing plate are raised to a suitable temperature, adjust the cooling temperature meter to a suitable temperature (generally should be 30 ° C);

6. When the medicine is full of the blanking track, press the green button of the motor to open the empty car. After the blowing, heat sealing and punching have reached the requirements, press the pill ring vibration button and the planetary cloth switch;

7. When adjusting the blanking, make the blanking meet the requirements and carry out normal packaging;

8. After the package is finished, shut down in the following order: press the pill bucket off button - press the motor red button - the main machine stops - turn off the main power switch - close the intake valve - close the inlet valve. Then clean the machine and the site, and maintain the packaging equipment.


NEWS

Copyright © Liaoning Soaring Eagle Machinery Co.,ltd All Rights Reserved   

Technical Support:

skype whatsapp Wechat