Home > News
News

Possible Problems With The Bag Automatic Packaging Machine

Oct. 11, 2019

There are many enterprises that use the bag type automatic packaging machine to have many faults when they are used. After finding someone to fix it, it can guarantee that there will be no failure for a period of time, but after a while, there may be a malfunction. In fact, the problems that arise in the bag-type automatic packaging machine are well solved. Based on the fact that we are a Herbal Medicine Liquid Filling Machine Wholesaler, we will take professional measures to ensure that the liquid does not leak when manufacturing such machines, so as a professional manufacturer, I can tell you how to solve various problems in the automatic packaging machine.


Herbal Medicine Liquid Filling Machine Wholesaler


Herbal Medicine Liquid Filling Machine Wholesaler


The first type of missing material problem. If there is no bag under the feeding opening of the bag type automatic packaging machine, when the holding cup suction cup is opened in the past, the feeding opening opening problem occurs, which indicates that the pressure detecting switch of the bag type automatic packaging machine is not adjusted and needs to be adjusted. If there is a bag under the discharge door, one of the claws does not grasp the bag, and the discharge door opens the sprinkling, which indicates that the pressure detection switch is not adjusted. If the feed opening is a corner leak, first check if the suction cup of this corner is damaged. If there is no damage after the inspection, then check if there is any foreign matter in the suction cup cover to block the discharge opening. If it is not a problem with the feed opening, then there is a possibility that the filter has too much dust. At this time, the filter should be removed for cleaning, so that the problem can be effectively solved. In this way, when we use the Automatic Packing Machine For Food, we can effectively avoid the leakage phenomenon. If these problems are not the case, it is very likely that the feed opening opens too fast to blow the bag opening, and the opening speed of the lower opening door is slowed down. If there is still sprinkling, check between the open suction cup and the discharge door. Is it not aligned?


Another point to note is that when replacing the product, pay attention to whether the current product and the automatic packaging machine for the bag are in conformity. If it does not meet the requirements, it is very likely that the material leakage will occur. In addition, if the powder product is damp. It may also cause leakage.


The second type of seal is not strict. This is also one of the more common problems of bag-type automatic packaging machines, and it has a great impact on the production of enterprises. For example, when using Automatic Sauce Packing Machine For Food, if the sealing is not strict, it will leak air and flatulence, which has great harm to food preservation. ,decline in quality. Therefore, if the bag type automatic packaging machine has a failure of sealing, it is likely to be a problem of heat sealing the heating plate. We must first check if the temperature of the heating plate is up to standard. If it is up to standard, check if some of the set heating time is too short. If the heating time is normal, it is most likely because the heating temperature is not enough, then the heating temperature can be debugged. If the temperature of the heating plate has not changed after debugging, it is very likely that the heating plate is damaged, so the temperature is not enough to seal. The most common problem with the damage of the heating plate is that the internal heating element is aging or damaged. We need to take care of the heating plate and carefully check it. The damage is not too serious to replace some parts. If the damage is too serious, it needs to be replaced with new heating. The board is OK. If the heating plate is still not repaired, you need to debug it at this time. If there is no problem with the heating plate, then it is very likely that the sealing machine is not stable or the pressure is not enough. At this time, we can adjust the pressure to solve the problem. If there is no problem with the heating plate and the sealing machine after the inspection, it is very likely that the bag is a problem. For example, if there are foreign objects or texture problems in the bag, it is very likely that the sealing will not be the case. If this happens, the supplier of the bag needs to be solved.


NEWS

Copyright © Liaoning Soaring Eagle Machinery Co.,ltd All Rights Reserved   

Technical Support:

skype whatsapp Wechat